In this article I’m going to show you how to clean a curling iron or a hair straightener for this process. You’ll need super fine, steel wool, a towel window, cleaner of any type, a curling iron or a hair straightener. The process for cleaning curling irons and hair straighteners is exactly the same. Today. I’M going to use the example of a curling iron for your first step.
You want to make sure that your curling iron is unplugged and cooled down. Next, you want to take your super fine steel wool and lightly rub on the iron surface. Don’t apply a lot of pressure because you don’t want to scratch your iron, but just watch until the hair spray build up, comes off and you’ll see. If you have a shiny iron like i do, the hairspray build up will come off and the iron will have a nice shiny, polished finish again for your next step. You want to take your towel and spray. Incidentally if you are looking for a good hair car tips, visit this site for a whole lot of information on hair styling tools.
Your glass cleaner on the towel until it’s fairly damp like so and finally, you want to take your wet rag and just wipe off the residual making sure it’s extra clean and what you’re left with is a nice clean, shiny, ready to use iron. Thank you for watching my segment on how to clean a curling iron or a hair, straightener
Method two
If your curling iron is starting to smell like sulphur, it’s time to clean it! Here’s how. First, get a rag and fill it with lemon juice. It’s acidic, so it will cut through any gunk and smell. Next, apply it to the entire barrel. You can also use vinegar or rubbing alcohol. Remember to let it dry completely before plugging it back in.
If you’re cleaning your curling iron yourself, make sure to unplug it first. This will reduce the risk of electrical shock. Then, take a damp paper towel and dab it on the heating element or plates. Then, apply the solution to the cloth. Don’t submerge the iron in the solution. Instead, rub the alcohol or water into the cleaning cloth until you see the stains and buildup.
The next step in cleaning your curling iron is to mix baking soda with water. This paste should cover the entire barrel. To remove any remaining gunk or grime, rub the mixture on the curling iron with a toothbrush. Be careful not to get the coating wet because the solution will turn into a puddle. If you’re worried that the mixture might drip water on your hair, you can use a dry cloth to wipe the area.
After rinsing out the hairspray, the next step is to clean your curling iron. To remove any stubborn dirt, mix rubbing alcohol with water. After the water, apply the paste to the curling iron. If it seems to be sticky, use more rubbing alcohol. Repeat until you feel that it has a clean feeling. If this doesn’t work, try applying a lubricant to the iron to get rid of any remaining residue.
If you’re using a professional curling iron, it’s best to avoid water while cleaning. You can use rubbing alcohol or water to clean the curling iron. You should always turn off the curling iron before you start cleaning it. Otherwise, it could cause an electrical shock. If you’re cleaning it on your own, you may want to use a commercial cleaner. You can also try rubbing alcohol, but be sure to make sure the cleaning solution is effective.
Once you’ve cleaned your curling iron, you can start the process of cleaning it. You can use rubbing alcohol to clean the barrel. Simply mix one part of the solution with water to create a paste. Then, you can gently scrub the iron with the brush. If the residue is still too difficult, you can try applying more cleaning solution. Then, let the iron air dry before you use it again.